Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, we are currently in the process of migrating to the new Cisco ISE appliance. As part of the process, we change TACACS+ configuration on all our devices. During migration we’ve encountered problem with our Cisco Catalyst C9500 core switch, whic...
Hello,I've recently deployed "Guest" SSID in one of our remote branches. The network for the SSID is locally switched, it's NOT routed via MPLS to the HQ where Cisco ISE is deployed. However, I would like guest users to authenticate via sponsor porta...
Hello, I've been given a task to provide administrative access for local IT guys so that they are able to execute limited set of commmands. The following TACACS command sets has been configured to achieve that objective:Unfortunately, it does not wo...
Hello, We are experiencing issues with guest access in one of our APAC locations. People who are trying to connect to "guest" SSID are getting IP address from the correct VLAN and sponsor portal is displayd properly. However, after typing their login...
Hello, today I was trying to upload file to my C3850 switch. Unfortunatley, I received the following error:I get the same error message for all other IOS files.Any ideas?
But I'm also using local accounts as a backup authentication method. Furthermore, I'm wondering why it's working fine for most of the commands. As I mentioned before, I'm unable to execute "debug", "reload" or "conf t" command. Local authorization sh...
Hello,in my case it's slightly different, It looks like this:aaa authorization commands 15 default local group TACACS if-authenticatedDo you think it might be cause od the issue?
