Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having an issue telneting from any device on my network to a 4503 (running Version 12.2(31)SG).The following is the configuration for the vty lines:line vty 0 4 exec-timeout 5 0 login local transport input all transport output telnetline vty 5 1...
I have multiple 4506 switches having a problem with snmp. After upgrading to IOS cat4000-i5k91s-mz.122-25.EWA13.bin, these switches are having an issue being monitored via snmp.It almost seems like the snmp agent is frozen. None of my monitoring sof...
I have a strange problem. On two different switches on two separate occasions(both 4506 with Sup V-10GE), I have had the switches just stop working. Everything on the switches look normal, lights, fans, power, etc. But you cannot ping, nor telnet...
I understand that to hook two routers up back to back you have to have cables with a DTE side and DCE side(providing clocking). Furthermore, you would choose the same correseponding cable physical interface type (i.e. 232/449/v.35).However if you ha...
The issue I face is that I am trying to create an ACL that blocks outbound netbios traffic to the WAN. The challenge is that I don't have control over the router that connects to the WAN, however I do have control of the Layer 3 switch that connects...
Edison, the only other security ACLs in place are for snmp and for https access.There are no other ACLs that I can see in the config.one weird thing, that I did notice, that doesnt show up in the config are ACLs that appear to be for control plane po...
Thanks for the help. I kind of figured it was hung. I was hoping there was a workaround without a reboot. I have alot of switches and it can be difficult getting down time. I guess the best solution is to push for the downtime and simply go to an...
Here is what I got from those show stack commands:<--!! Output for 'Sh stack 60' !!-->Process 60: IP SNMP Stack segment 0x12510BC0 - 0x1251A030 FP: 0x12519FB0, RA: 0x10300ABC FP: 0x1251A020, RA: 0x108005C0 FP: 0x1251A028, RA: 0x10311A34 FP:...
Thanks for the reply Joe.I debugged snmp packets a little earlier and it was kind of weird. The debug is contantly spitting out that it is recieving UDP snmp packets from the Net MGT. server, but it is like the switch isnt doing anything with them. ...
Thanks for the reply. We have decided to upgrade the IOS and see if that fixes the problem. Right now it is at 12.2(25)SG. I will post if I find anything conclusive.Thanks
