Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here is my config... VPN is 172.16.4.0/24 and Internal network is 10.10.50.0/24. Once I am connected to VPN, I cant access the 10.10.50.0 network.!crypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2!crypto isakmp client config...
Hi all,I just need to confirm if a router/switch does NOT have high utilization, does QOS still kick in? I have a strange situation with one of my devices showing drops, but the bandwidth is no where near saturation. However I do see drops for one of...
Hey all,I need to find out how to implement an IDS system into my network. What is the quickest way to learn IDS?I know the difference between IDS and IPS, etc. But i dont know how to configure it at all..or what any of it means..Can you help?
To check to see if your ISDN line works, trying dialing your own number from the router.Router(Config)#Router(Config)#isdn test call int ser0/1 xxx-xxx-xxxx If your phone rings, it works
Hi Reza,There are 3 subinterfaces for my WAN and ive noticed 2 of the 3 take some drops. However its taking drops in a higher queue while the default class do not have any drops. I did see on NBAR some high amount of bits used within 30 seconds. Its ...
Here is the port channel and interface configurations..You will need to make the ports LACP and that is described with the Channel-group mode ACTIVE(active meaning lacp)Configure the ports....interface GigabitEthernet3/1 description To ISCSI switchpo...
