Hi,We have a switch 3850 in a remote office to connect to a Dell Server. we wanted to deploy the same as other remote offices.I try to find why the etherchannel on the WS-C3850-24P-S is not working on port G 1/0/1.Saddly I did not found the configura...
Hi,on our DNA Center appliance, the CIMC run the 4.0.4b version. I wanted to upgrade it I did not found the matrix ou upgrade documentation specific to DNA C 220 M5. Thank you for the help Daniel
Hi,I try to upgrade the existing IOS 15.2(4)E2 to an Release 15.2.7E3 for a switch WS-C2960CX-8PC-L.command to do the upgrade:archive download-sw /overwrite /reload tftp://172.16.11.125/c2960cx-universalk9-mz.152-7.E3.bin!!test TFTPSW_01#copy running...
Hi,Software Configuration Guide, Cisco IOS XE Gibraltar 16.12.x (Catalyst 3850 Switches) - Ciscoonce upon the time, its was a full pdf book, it was easy to download and seach The seach on the bar seem not working with LACPIf you open Contents, Layer,...
thanks for the helpthe solution was found by a colleague, the other port was was on G1/0/19, not on the G1/0/1. I was searching to far. Just shut the port on the Dell, identify the port going dow and reconfigure.. well done Is the configuration guide...
Hi Mike,I put the 4.0.4n on my CIMC, it works (one hour at all, starting the services from DNAC take some time to start) I used the https://unofficialaciguide.com/2018/08/25/upgrading-the-cimc-for-your-apics/ , helpfull link My contractor tell me the...
Hi Mike,thanks for your post so we have an 44-core promotional appliance: DN2-HW-APL-U it should support the version 4.1(h) but saddly not mentionned by the document. may be it will be safer to validate with the TAC Best regardsDaniel
Thanks Leo,I apologize, I had a bad copy/paste.With the good string it works better "archive download-sw /overwrite /reload tftp://172.16.11.125/c2960cx-universalk9-tar.152-7.E3.tar"Best regardsDaniel
