Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a need to use PBR and route-maps in our environment. The ACL in which we reference the route map looks likeip access-list extended Live-PBR-1 permit ip host 172.19.0.20 192.0.0.254 30.255.255.0we have noticed that in testing we only see half ...
I am just about to embark on an MSTP migration from RSTP in a dual datacentre environment. Wanting to keep things simple..can anyone see a downside to having a region per datacentre, with between 1-5 instances per dc. Any benfit from having more than...
Hi,I recieve the following error when I attempt to do a backup:The directory [C:/CSM Admin Folder/] contains space. Backup directory should not have space.Suggestion: If the folder is [Program Files] use [Progra~x] I'm unsure what this is telling me....
Cisco Security Manager 3.2 SP2ASA5540 V7.0(7) single context, routed modeUsing the Device View to add an ASA, enter address, name and credentials and recieve error messge "unable to connect to the device. Device connectivity test between the device a...
When enabling isakmp keepalives on the headend to support dpd for failover to a secondary peer, what will be the impact on those other tunnels where there is not a seconary peer and the remote end does not have isakmp keepalives configured. Does the ...
I have two datacenters and have decided to go with a single region covering both DC's and multiple instances, grouped according to the location of specific VLAN's. A couple vlans are shared between the two sites and these will sit in their own instan...
There is insufficient information here to help resolve your issue. What is the default gateway you are pinging, where does this sit in relation to the client. DO you hve routing running on your 3750? Steve
Update:WHen performing the same action through the client interface, rather than from the server interface the backup has appeared to work. Is this a feature?Needless to say I was able to run a backup. Steve
Problem resolved. Appeared to be an issue with local IP connectivity, which is now resolved. succesfully able to add ASA as device into CSM. Thanks, Steve
Steve, As a first off, without knowing more about what the switch is doing its difficult to say whether high memory utilisation is to be expected or not. Having said that you should save the output from a show tech and enter it into the output interp...
