Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When I view the Real-time Log on a PIX525 (ASDM 5.2(2) & PIX 7.2(2)) and click on an entry to select it(maybe to get more detail on it), I cannot then "unselect" that entry. The annoying bit is that the selected entry stays on the screen while the si...
When I am configuring a new 2950 switch, I sometimes copy and paste various parts of an existing config from another switch. As a matter of course, we tie down all user ports to 10Mb/Half, unless there is a good reason for them to run at 100Mb.If you...
We have an OSPF problem where one subnet (and only one) is not being advertised. We originally spotted the problem from another (non-Cisco router), but looking at the OSPF database on both our Catalyst 6509 MSFC’s would seem to confirm the problem.Th...
We swapped out a c2950G-48 for a c2950G-24 today (the 48-port switch was heavily under-utilised). We used the same hostname and same management IP address for the new switch.Once the new switch was installed I wanted to double-check the new config ag...
At the risk of posting a silly suggestion, have you tried show mac-address address xxxx.xxxx.xxxx (instead of xx.xx.xx.xx.xx.xx)?It does sound like a bug though if it worked ok in the previous IOS that you were running.Pete
The wireless card and LAN card in the laptop will definitely have different MAC addresses.We had the same thing with the wireless MAC addresses a while ago and I put it down to devices associating with different APs as they moved through the building...
This was how we configured the switches at my last place.aaa authentication login default group tacacs+ localaaa authentication enable default group tacacs+ enableaaa authorization config-commandsaaa authorization exec default group tacacs+ local aaa...
