Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a Cisco ASA 5505X at home. Is it possible to configure the EEM to send e-mail from my gmail e-mail? I've found syntax that shows EEM can send e-mail but no examples with Gmail specifically.Cisco EEM Basic Overview and Sample Configurat...
Hello,I’m having an issue where wireless clients can’t access the wireless guest VLAN (25), SSID “Olivine”. Clients are able to connect to the wireless guest network but are unable to pull an IP from the DHCP server on that network. I have Ubiquiti...
Hello,At my home, I had an 8 port 2960G switch die after a power outage today. I replaced it with a ISR 1921 that has an 8 port ESM. It's been a very long time since I messed with configuring ESMs... My plan was to just copy over all of the switch...
Hello,With the older ASA 5505, 5510, 5520, etc. series devices, you could add an SSP module that would give you IDS/IPS functionality. This functionality showed up in the ASDM GUI as an additional tab.The newer ASA 5506-X doesn't have a slot for a m...
After a lot of trouble-shooting, I found my issue. I recently replaced the 2960G and copied in the old config. Copying in the config doesn't create the VLANs in the vlan.dat though. I had to manually create the vlan.dat entriesconf t
vlan 25
name ...
Hello,For anyone else having the same problem, I found my solution here:https://community.cisco.com/t5/switching/command-rejected-bad-vlan-allowed-list-you-have-to-include-all/m-p/2067603/highlight/true#M234772 Per Peter Paluch,On older switching pla...
Hello Marce1000,Because this is a configuration at home, I'm somewhat limited in the gear I have on hand. I suppose if a work switch died, I'd probably replace it with a spare; I just don't keep spares at home. I suppose I could purchase another 29...
Hello Georg,The syntax you proposed doesn't work for me:event manager applet Config_Backup
description Backup running-config when changes are made
event syslog id 111010
action 1 cli command "copy running-config tftp://192.168.1.10/firewall.cfg"
...
Hello Marvin,Thanks for the reply. So, the SSP version info displayed in a 'show ver' is due to legacy code from the older platforms. You mentioned a software module. I suppose that software module is something that would be activated with a licen...
