Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am in the process upgrading the SMA and one of the pre steps is to 'drain the e-mail and web queue' prior to upgrade. What does this mean? How is it done?
I am trying to rollout device profiling through ISE 2.4 for our enterprise small branch offices. In the past we have been using extended ACLs on the switch SVI to manage access. The introduction of ISE profiling seems appealing, but I am unsure about...
I am trying to get a sense of best practice approach here. Currently have two data centers that are connected to my branch offices via BGP into the ISP network. The plan is to send all default route traffic to one Data Center to get to the internet a...
I am trying to go through to Meraki API to turn up an existing static route on the site-to-site VPN of the MX-65 device. Is there a way that this can be done?I have no issues pulling the information using the API, but I can only turn up the VPN via ...
Hello,
I am trying to use a template to deploy multiple 2960s in multiple locations via APIC-EM PnP. Does anyone know how I would be able to create a variable for an ip address? It seems when I use the $ I can only capture the first two words. ...
I definitely agree that closer to the source is always better. Rest assured, I definitely prefer to move in the direction of dACLs as opposed to RACLs...there's no disagreement there. I guess my thought was that the NAD would have to process every AC...
Thanks!That actually sounds like a good idea…I’ll try to lab it up. In my setup, I am using a single WAN router at each of the locations (branches and each of the data centers) for this particular ISP. We are also only running eBGP. My objective is...
You are absolutely correct. I was able to correct the static route via Postman. I think the issue may have been that I was not correctly I identifying the hubs. I just have to modify it to the python script. Thanks a lot for your help on this!
It looks as if you are running this through the hub. I currently have multiple devices that are running as spokes going back to a "VPN concentrator" HUB at my data center. The spokes are advertising the local subnets back to the data center HUB. I a...
For the MX-65 device...under Site-to-Site VPN option, there is a section called VPN Settings. There you have the option to select 'Yes' or 'No' for the Use VPN option. Using the portal you can opt to select the to use VPN regardless if the subnet is ...
