About kaijagekironde

kaijagekironde · 04-13-2011

Hi guys,I have a serious problem (see attached topology)From R1 and R2 i can ping subunterface 10.222.180.1 on R3 but with packet losses ,but i can ping the rest subinterfaces 100%.Also from R3 i receive packet losses when i ping 10.222.180.1( which ...

kaijagekironde · 02-09-2011

Hi,Currently we have 2 ISPs and the company is going to buy a new 1 by next week.And am supposed to configure redundancy and multihoming ,Please can any one give me an idea how i can achive this?

kaijagekironde · 04-18-2011

Hi Guys,I got the solution,there was a command rate-limit configured on the subinterface. It was the one causing problems, after i removed it ,everything is fine now.Thanks for your assistance.

kaijagekironde · 04-14-2011

SITEB_switch#show interfaces Gi1/0/1 switchport Name: Gi1/0/1Switchport: EnabledAdministrative Mode: trunkOperational Mode: trunkAdministrative Trunking Encapsulation: dot1qOperational Trunking Encapsulation: dot1qNegotiation of Trunking: OnAccess Mo...

kaijagekironde · 04-14-2011

new topology

kaijagekironde · 04-14-2011

Hi,I have just added another router R4 10.222.180.7i can ping 10.222.180.1 100% ,as well as 10.222.180.3 and 10.222.180.4From R1(10.222.180.4) i can reach 10.222.180.7 100% (though it stucks stucks)..............

kaijagekironde · 04-14-2011

Here we go.from where you pinged ther is VLAN1 only? YES#######################################################################################R1#ping 10.222.180.1 repeat 100Type escape sequence to abort.Sending 100, 100-byte ICMP Echos to 41.222.180...

Member Since	‎12-07-2010 10:15 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	10

User Statistics

User Activity

Packet loss on sub interface

BGP with 3 ISPS

Re: Packet loss on sub interface

Re: Packet loss on sub interface

Re: Packet loss on sub interface

Re: Packet loss on sub interface

Re: Packet loss on sub interface