Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting the following error message from two devices on my network:CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=<removed> local=<removed> remote=<removed> spi=F1E30F16 seqno=0000905DCisco decodes the message as:%CRYPT...
Hi,I have a client who wishes to use a single T1 to carry data and voice between sites.I believe I can use the VWIC2-2MFT-T1/E1 to split the T1 into data channel & TDM voice groups, but I'm kind of struggling with the concept.I'm good on data, but do...
Have a look at this page: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800946a4.shtml#tshootIt may not describe exactly what you are doing, but it has a good troubleshooting section and describes how you...
That's almost cetainly failing now because of the overlap in networks.once the 172.28.53.0/25 network traffic hits the 172.28.0.0/16 network it wont have a return path simply because the router thinks that network is directly connected.You have to NA...
if you ping it from the same vlan then the arp response should come from the affected server and not the router, which should fill the cam table correctly
