Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco IP Communicator (SIP) v 7.0.2 using SIP with Asterisk. It is remotely connecting to an Asterisk PBX server (not on my LAN) with a TFTP server. It get stuck at "Registering" - and gets the configuration files fine.
Any suggestions?
Here's my current setup:
AIR-WLC4402-12-K9 (SFP Port 1 with a GLC-T via a Cat5e cable) -> Plugs into: FastEthernet0/5 (Catalyst 2950)
AIR-LAP1042N-A-K9 -> Plugged into FastEthernet0/6 on the Catalyst 2950
What do I need to do on the Catalyst 2950 to ...
Will the WLC4402-12-K9 work with the AIR-LAP1042N-A-K9 and Catalyst WS-C2950G-48-El?
WLC4402 -> FastEthernet0/5 (Catalyst 2950) -> AIR-LAP1042N-A-K9 (Plugged into FastEthernet0/6 on the Catalyst 2950)