Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey forums, so I have a situationI used to be able to SSH connect from my Catalyst to my Nexus, doing like a nested SSH situationAfter I updated the Nexus to the version 8.4.2, when I attempt to access the Nexus, it closes my Catalyst SSH sessionI am...
Hello,So we are having a connectivity issue inside our virtual VMware environmentFirst a few things about our environment:Fabric Interconnects configured as EHMWe have multiple VLANs configured on our Fabric InterconnectsThe ESXi blades have at least...
Greetings,
So we have 3 UCS that have a FC HBA card installed, but when you check the PCI Adapters tab in the CIMC, this slot appears as "Not Loaded" in the Option ROM Status
Weirdly enough, when you check the BIOS Parameter configuration you see t...
So we have a Nexus 7k supervisor standby card that wont boot
When we do "system internal flash" we see that the directory "nxos/tmp" is full and this might be the reason that it doesnt boot. When we check this directory there seems to be a file "tftp...
Hello guys,
So we have a problem here with two Nexus 7k that suddenly couldnt save the running config
copy running-config startup-config
[########################################] 100%
Configuration update aborted: request was aborted
Someone in t...
nothing on the nexus, and its like a ssh close session instead of crashnot sure why when i logging into the nexus, it closes the session on the catalyst
Hey Wes, we are using originating port ID,I was thinking about deleting even one of the vNICs to discard the factor of load balancing, but it is configured properly
Hi Kirk, thanks for your replyWhat do you mean with sanity check?I did check and mapped the right vNICs as the uplink of the vSwitches, and tagged the right VLANs on the vNICsAnd I have no issue with the MAC of the ESXi vmNICs as they are the same of...
