Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys
I'm searching to replace our Juniper stack switches to something supports three things in the same time:
- at least 4 100g interfaces (QSFP28) - could be in a expansion module.
- 48 RJ interfaces (1g)
- 48 SFP+ interfaces (10g)
all should ...
HiWe installed new Cisco C9300 stack (v16.12.4)and connected ports Te1/1/1-4 and Te2/1/1-4 to 4 HP DL360 servers (each HP server has two NICs)So Te1/1/1-4 is connected to all 4 HP serversAnd the other Te2/1/1-4 is also connected to the same 4 HP serv...
Hello We need to block in our ironport nested compressed/archived filesfor example: zip files that include zip filesor zip inside zip inside zip etc ... what is the way to do this? we built this content filter but need to complete it to accomplish th...
Running SMA v 13.8.1When trying to run the 'localhosts' hidden command it is not workingironportSMA> dnsconfig
Currently using the local DNS cache servers:
1. Priority: 0 10.25.118.1
2. Priority: 0 10.25.118.2
Choose the operation you want to pe...
I appreciate your answer ! That's new to me an I will consider it.
Regarding Nexus, Could a combination of 93108TC-EX + 93180YC-EX be in one stack. If yes, then I think this could be a very good solution. as it has a combination of copper and sfp and...
Hi Leo
I just edited my reply few seconds before you answered
Could a combination of "2x C9300X-24Y" and "C9300X-48HX" be in one stack ?
And then maybe if I add modular uplink: C9300X-NM-4C for 100G ports for each switch in the stack. Could this be p...
There is no much in a topology
It is a stack of switches which provide uplinks for, UCSs, ESXi servers, emc storage ...
There is no VoIP neither PCs
Could a combination of "2x C9300X-24Y" and "C9300X-48HX" be in one stack ?
Actually I came from Juniper side, they have there a mixed virtual chassis, means mixed stack, means you can combine different switches platforms in one stack.
Could a "2x C9300X-24Y" and "C9300X-48HX" be in one stack ?
And then maybe if I add modula...
Thanks
Could a "2x C9300X-24Y" and "C9300X-48HX" be in one stack ?
And then maybe I will add modular uplink: C9300X-NM-4C for 100G ports
Could this be possible ?
