Hi Netpros:I have C2821 to use EoSDH link on fix GE port , I concern that dose it process real 1000M traffic when running routing protocol and Mpls etc..thru it's line speed forward in documentation.thanksHerman
Hi netpro:I meet a curious solution from cisco DOC, if I want to use 2*HWIC-4ESW same time , I must stack both cards,how to avoid it , I really need 8 ports on it , do I have to buy HWIC-D-9ESW ?thanksHerman
Hi netpro :I have a WS-C3560G-24TS, one GE port connects to SP device,their ethernet port(100/full).everything looks good, but I watch lots of pause input ,almost several thousands,what's the cause ?Brherman
HI :thanks fast response , but may I have a practice value or exact test result to refer , less than 500M , it means based 1500Byte or what's testing environment. thanksHerman
as below display ,you can see there're lots of violations, and the link is flapping in night generally.and the router connect to a sp modem .if I could judge there is some uncompatible between them.thankscn-pek-vertu-rtr01#sh contr e1E1 0/0/0 is u...
Hi Taj:thanks for your response, but there is no isdn application on my router even not sh isdn command.I want capture the err packets, just like using debug ppp negotiation command ,we could get a lot log. thank u zhou