Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi fellow experts,I have some queries regarding some redundancy design, as we're in the midst of swapping 7600 boxes with ASR9K. First of all, is it possible to configure the same vlan encapsulation on two different sub-interfaces belonging to two di...
Hi all,was wondering if anyone could kindly point me to the right direction as to what is the maximum supportable MTU value on the ASR9010 for the following cards: A9K-4T-B & A9K-40GE-B?Tx.
Hi all,appreciate some pointers here. This is with regards to metroE. Pls find attached the jpeg file with configs that i've included for an issue that i'm facing. Current setup is i have 1 x ASR9K as NPE and 1 x 7600 as NPE (with ES+ card connected ...
Hi all,i came across this weird issue and can't seem to find out what's wrong yet, figured i'd get opinion from u guys outhere. Pls refer to the topology. Router5 link to Router3 is shutdown, forcing packets to route via Router1 btw router3 & router5...
Hi all,I have a scenario in which i've setup (pls refer to the attached diagram). On R1 I would like to achieve load-sharing for traffic to destination networks 60.x.x.x/24 & 160.x.x.x/24 (advertised from R9) via border routers R4 & R5. I am able to ...
Hi Laurent,Thanks for the confirmation on Scenario #1. Yup exactly what i was looking for. So I believe even if i run MST on the UPEs, the control traffic (STP BPDUs) are carried in Vlan 1 and since Vlan 1 defaults to untagged, i was hoping that matc...
Hi Laurent,Thanks for getting back.. 1 more question, since u've pointed out on the difference btw IOX & IOS on MTU.. on the ME4924 max supported is 9216 bytes as stated in the following link:http://www.ciscorouters.biz/en/US/prod/collateral/switches...
hey laurent,pls find the configs n show output. 2 files, "translate-working.txt" uses "rewrite ingress tag translate" which is working while "pop-not working.txt" uses "rewrite ingress tag pop" which is not working currently.appreciate the tip.
