Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
I want to create an access control list on a router that does the following:
1) access control list to deny all inbound traffic with network addresses matching internal-registered IP address
2) Deny all ICMP echo request traffic
3) Deny a...
Hello
Attach is the image file showing server having two different NIC connected to two different Layer 2 switch. Now my query
1) How in packet tracer we can use NIC teaming in server
2) if suppose one link goes down how it can transfer it to other...
I am trying to ping from a pc LAN 1 to a Webserver having IP address 8.8.8.8. The PC LAN 1 is a VLAN 20 having IP address 10.1.20.10 subnet mask 255.255.255.0 and I have designed a switch virtual interface (svi) for it having IP address 10.1.20.254 s...
Hello RJI I know this topic is different from this one but I shall be grateful if you kindly give me an idea
Attach is the image file showing server having two different NIC connected to two different Layer 2 switch. Now my query
1) How in packet...
It is not showing Sequence numberRouter(config)#do sh ip access-list WAN_ACLExtended IP access list WAN_ACL permit tcp any host 203.1.1.2 eq smtp permit tcp any host 203.1.1.2 eq 993 permit tcp any host 203.1.1.2 eq 443 permit tcp any hos...
Router#show standbyFastEthernet0/1 - Group 1 State is Active 5 state changes, last state change 00:00:27 Virtual IP address is 10.1.11.12 Active virtual MAC address is 0000.0C07.AC01 Local virtual MAC address is 0000.0C07.AC01 (v1 default) ...
