Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning all, Today I am faced with a problem which I cannot explain. Equipment used : 2x Cisco WLC 8540 SSOAP: Cisco AIR-CAP2702i-E-K9Switch: Cisco WS-C2960X-48FPS-L (stack of One of my Wi-Fi hotspots located outside regularly goes up to 100Mb...
Hello,I am looking for a fanless Cisco switch with 10G ports that can be managedvia CLI.So I found the model CBS350-24P-4X, my question is : is the administrationand configuration level in CLI 'Textview' equal to a switch running underiOS like a WS-C...
Bonjour, Le routeur de mon infrastructure Cisco est un C891F, sa liaison internet se fait par le port gi8 avec une Neufbox SFR derrière.Aujourd'hui, je cherche à faire évoluer mon infrastructure vers un double accès WAN en remplaçant le routeur C891F...
Hello,In my infra, I have a QNAP server allowing me to transfer files (especially movies). This server is on VLAN 20.For my user devices, I use VLAN 100.When I try to transfer a file from the NAS to my PC, the speed does not exceed 400 Mb / s whereas...
Hi,I currently have the following configuration (6 VLANs) and I have a question regarding ACLs.I would like VLANs 100 and 110 to be able to communicate with all other VLANs but other VLANs not to be able to communicate with VLANs 100 and 110.Thank yo...
HelloThanks a lot for your help.My reflective rules allow me to communicate from VLAN 100 to VLAN 20 but not from VLAN 20 to VLAN 100:VLAN 20 -> VLAN 100 = impossibleVLAN 100 -> VLAN 20 = possibleI changed the configuration and the speed goes to 750 ...
Hi Francesco,Thank you very much for your help, what I wanted to do works very well thanks to you. THANK YOU !However, I have a little problem that I cannot solve. My router has the management IP address 10.0.100.1 and it is the only one that cannot ...
Hi,Thanks for your help, but that it's not what I'm looking for.I want VLANs 100 and 110 to be able to communicate (ping for example) with all the other VLANs. But I want all other VLANs to be unable to communicate with VLANs 100 and 110.I want to al...
