Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
TeamI have a CMX 10.6.3 that does not authenticate to our Cisco ISE using Radius we think it has something to do with the certificate we are using. Is there a specific certificate we are supposed to use for our CMX to authenticate to our ISE 3.2?
We will be replacing a Cisco 5520 wireless LAN controller with a Cisco 9800 wireless LAN controller VM. My question is can the Cisco 9800 wireless LAN controller VM be placed into a Cisco Software defined fabric?
I have a Cisco Prime Infrastructure 3.7 VM and after a reboot Prime no longer captures wireless client data in monitoring tools. And the WLC is working and capturing the wireless clients and in Prime Maps the wireless clients are captured there so an...
AmmahendThis is what we did, and the results and we followed the Cisco documentation but the certificate location was asked for and so we differ in process. cmxctl config authserver settings Enter external RADIUS authentication server host : Enter ...
ammahendI used this document https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6-3/cmx_config/b_cg_cmx1063/performing_administrative_tasks.html In this document I reference the below The following example shows how to configure a...
