Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a problem implementing OWA 2000 (W2K SP4). The webpage loads, and I see my inbox, and can read and write emails.The page generates errors and I'm not able to see the public folders.We have a VPN 3005 with 4.7.2i.We have OWA front end and...
Short fix is to disable inspection of RTSP. Fixup is telling the Pix/ASA to do deep packet inspection to see if the segments match the protocol-sequence. If you're not familiar with the fixup-commands, but work with the GUI, you can go to "service po...
Don't know if it helps, but I have the same states as you described when using inaccessible authentication bypass. I use Avaya 9600 without LLDP, but with dot1x multi-domain. When ACS is reachable, everything is ok (Avaya 9600 and laptop behind it) W...
You should find a good model in the 1800 range. 1802 will do good, Good value for money. Give a good throughput:http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8028a95f.html
Hello Rob,I'm very interested in how you managed this. I have the same idea for providing redundancy and more bandwidth to our spoke locations. I tried DMVPN. This brings the tunnel down at the spoke-site, when there is a internet-problem but never ...
