Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I know it is a very very old devices we see a very very weird thing in the switch , we try to connect a device to one the of the interface On the endpoint device side, I can see the interface is up, no issues, but the switch side shows downwe admin-d...
I have a requirement which needs your help, many thanks in advance for example, vlan 200 , 10.10.10.0/24I have hsrp in 2-N7Ks in this vlan , but with a different group with different VIPunder SVI 200 hsrp 1 --VIP1 --10.10.10.1 and hsrp 2--VIP2--10.10...
Hi team , need your help with the " clear ip nat translation outside <local ip> <global ip >I tried few times , but always get the " %translations not found",, but actually the translations are still there the reason I dont want to do the clear ip na...
Hi Team , I need your help to verify if N5K SPAN source can mix with VLANs and Interfaces,N7K doc said it is ok, but I never tried, also I don't find doc side N5K can do this example monitor session 1 source vlan500, e104/1/2monitor session 1 destin...
Hi Team ,
I created one time on-demand tech-support for my ACI 2 leaf switches.
I do see 5 files created and store in my APIC , with all the details of the locations, etc
but when I try to download them from APIC to my local PC , it asked for use...
First, thanks, LGThe interface is defaulted, there is no configuration, and I just "no shut" itinterface still show down, not in erridisable mode as well GigabitEthernet0/1 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, an...
ya, that's the problem, those servers are old and I'm may not able to identify each one of them ...I am just trying to see if there is an alternate way to avoid this part. I was wondering if there is PBR can be applied based on the hsrp group
