I am trying to create subinterfaces on a 3560 switch on gi0/1 interface..Can some please help? thank you !!!current ios is flash:c3560-advipservicesk9-mz.122-44.SE2.bin"I want to be able to create the following:interface GigabitEthernet0/1.20interfac...

Here are the 2 switche configsSw1interface Vlan880  ip address 153.112.88.254 255.255.255.0 no ip redirects no ip unreachables ip policy route-map Default-Hop standby ip 153.112.88.1 standby priority 255 standby preemptendSw1#ping 153.112.88.10Type e...

I am finding throughout our network that there are duplicate routes with different next hops..exampleip route 157.171.1.0 255.255.255.0 157.171.10.1ip route 157.171.1.0 255.255.255.0 10.10.1.1there does not seem to be an issue that I can see but shou...

switched slots, rebooted, reseated card..nothing I can not get it to recognize the card..any ideas?appreciate the help

I am trying to add a rspan vlan to a port and I get the following: rsap31-s (enable) set vlan 901 6/5Vlan 901 is an RSPAN vlan.Failed to add port 6/5 to Vlan 901.It has been added to other ports, do I have the syntax wrong or is rspan the issue? Than...