Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ok so I came across the Cisco Unity Mobile Message Access for Blackberry plugin which I was able to install on the Blackberry BES server. So now when I get an email notification on the blackberry it contains a link that contains part of the followin...
I have a 3662 core router, that has 4 T1's that are combined into a Multilink interface. I monitor this router with Solarwinds Orion Network Performance monitor. I am seeing alot of buffer misses; small, medium and bigStarting to get a little concer...
What is the "Privacy" line feature when setting up a phone button tempalte?I can't seem to find a good explaination anywhere about it, I see it mentioned as being something you can select when setting up a template but nothing that actually explains ...
We have an internet T1 coming into a 2651 router. Seems when emails go out to the internet from the server behind this router, the IP address that shows up when you look into headers of an email is not the address it should be showing as where it co...
We are running CM 4.1(3), with a Cisco 3662 handling our two PRI's. We have incoming caller ID but it only shows incoming phone numbers, not names with the phone numbers. We are working with the phone company to get names working with it as I under...
I apprecaite all the help, and I believe the info will be beneficial if I can get past the simple aspect of not having the /BAP virtual directory. The /BAP just does not exist on either of my CallManagers. This seems to be the issue and I just can'...
Funny thing about adding that statement you mentioned, I failed to tell you but in my efforts to resolve this on my own, I actually put that very statement in:ip nat inside source static 10.202.32.29 109.216.160.194 When I did that, all hell broke lo...
Here is some more info:interface Serial0/0 bandwidth 1544 ip address 109.216.160.193 255.255.255.240 ip access-group 105 in ip nat outside ip inspect internet out ip route-cache flow no ip mroute-cache service-module t1 timeslots 1-24 no cdp enableSo...
Well I did the debug isdn q931 on the voice gateway and got the following:5w2d: ISDN Se2/1:23 Q931: TX -> SETUP pd = 8 callref = 0x0B1A Bearer Capability i = 0x8090A2 Standard = CCITT Transer Capability = Spee...
Option number 1 that you mentioned seems to only be for auto registration which we do not use.Option number 2 & 3 would seem to be the right path. I made the changes mentioned in option 2, made a call but it still shows the main line and not interna...
