Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am really having a nightmare that is called S3260! Tons of bugs and caveats that face me in every step. Currently, I am trying to install windows server 2016/2019 on any of its disks/LUNs but it fails. In the Legacy mode, it boots from the kvm mapp...
I have an S3260 with factory installed firmware 4.0.1a. I tried to upgrade this to any 4.x.x using the UCSM, CIMC and the HUU but the CMC always fails to upgrade while all the other components could be upgraded successfully. Although the firmware dow...
I tried to upgrade the firmware of S2360 from 4.0.1a to 4.0.4h or 4.0.4k using UCSM, CIMC and HUU but each time the CMC update fails. All the other components were updated successfully. The 4.0.4k appears as the backup fw for the CMC although it was ...
I tried to upgrade the firmware package of the S3260 by associating a chassis profile to it. The BMC was upgraded successfully but the CMC fails to upgrade after several hours of retries. Current version is 4.0.1a and the new version is 4.0.4h. Any i...
we have a S3260 with a single server-single sioc. the 2 QSFP ports are connected to FI-A and FI-B but they are not detected. ports are orange in the UCSM page. ports of the FI are configured as server ports. any ideas?
Hello Kirk,I am really having a nightmare that is called S3260! Tons of bugs and caveats that face me in every step. Currently, I am trying to install windows server 2016/2019 on any of its disks/LUNs but it fails. In the Legacy mode, it boots from t...
Hi George,Thanks a lot for your help.I have run the MegaRAID Utility and I was surprised to find that no disks were assigned to Controller0. When I checked the zoning policy of the UCSM, I found that you can assign disks to controller 1 or 2 (no 0). ...
