Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
i have 2 Chassis 4500 with 2 supervisor for chasssis.
After a reboot, i have this situation:
100 Po100(SU) - Te1/3/1(w) Te1/4/1(P)101 Po101(SU) - Te2/3/1(w) Te2/4/1(P)
and the Supervisor:
show module Switch Number: 1 Role: Virtual Switch Active...
Hello, I have a problem with automatic profiling on Ise 3.1 for cisco phones (7861,8851) with MAB. So, if my device is already profiled on ISE in manual mode, when the phone is connected, it is recognized correctly, in fact in the radius logs I see t...
below is an overview:
In the network under consideration, we find ourselves with a Cisco 4500 device configured with two Supervisors per chassis. In detail, the Module 3 Chassis 1 Supervisor is connected to the Module 3 Chassis 2 Supervisor, and the ...
right now, it's not in split brain. My perplexity is about the current state. I only wonder if it is normal for the Port-channel to be in Waiting to be aggregated and that the cards are seen as Provision and not as ok with the show module.
Hi,
I found this architecture , we are talking about an implementation of 10 years ago, which has never restarted. Unfortunately, the customer does not allow changes at this time. I only wonder if it is normal for the Port-channel to be in Waiting to...
Hello,
Yes, I have already checked the SFPs, but they work properly. The problem I found on this client, who doesn't have a log storage system, so unfortunately I don't know what happened before. I found myself two active / active chassis.
show switc...
Hi @adamscottmaster2013
I have the same Issue with the version 3.2.0.542 Patch 4.
After the update I made on Saturday we are bombarded with these warnings, even if the clients are authenticated on the network.
Have you by any chance solved the probl...
