Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
DC-CE#sh ip ro vrf VFRB os 172.16.0.0/32 is subnetted, 2 subnetsO 172.16.1.3 [110/2] via 192.168.1.22, 00:00:53, FastEthernet2/0 192.168.1.0/24 is variably subnetted, 5 subnets, 2 masksO E2 192.168.1.16/30 [110/1] via 192.168.1.2...
It is because you are using repeatedly the "no ip next-hop-self eigrp 1" at spokes as well as HUB. So when spokes send the update to the remote spokes they PRESERVE the Next-Hop address as the Hub address. So Just remove the "no ip next-hop-self eigr...
Because you are changing the Hardware and copy past the config. Spokes will not re register themselves at HUB until you reset them again. Then they will register themselves again in the NHRP table at the new HUB..
Hi, Jose, Cisco refer to the 11 class model for the QOS baseline as the "Recommended QOS Configuration" the link below.https://www.cisco.com/en/US/technologies/tk543/tk759/technologies_white_paper0900aecd80295a9b.pdfI think I read a newer one also wi...
