About dj_oberry

dj_oberry · 10-23-2009

Hello all, I have a Cisco 7206 router. I run Version 12.4(6)T7, RELEASE SOFTWARE (fc5), advanced ip services on this router.I have several customers who, at random times and days over the last few months, call in and complain that they are unable to ...

dj_oberry · 08-20-2009

Hello, I am trying to use the mib on this page:http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8e.shtmlThis is the line I am having issues with: snmpset -c public Router_Source .1.3.6.1.4.1.9.9.16.1.1.1.3.333 octetstri...

dj_oberry · 08-07-2009

Hello all. I have a Cisco 2811 router on a lan network. I have NTP turned on on this machine, and have assigned a valid NTP server that another edge router we have uses. Internally, local machines asking this router for NTP get results just fine. How...

dj_oberry · 07-07-2009

Hi all, I have Cisco 2821 with the following IOS: Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(25), RELEASE SOFTWARE (fc2)I need to be able to terminate pppoe on this cisco. I wanted to use bba-group settings, but there are no c...

dj_oberry · 07-31-2008

Hello all. I have a setup with a Cisco router and 6 dialup access units (portmaster and ascend max units). I run OSPF. All the MTU sizes are the same. However, I am seeing the following error messages (ip information removed)Jul 31 11:26:00: %OSPF-5-...

dj_oberry · 08-20-2009

thanks. :)

dj_oberry · 08-20-2009

v 1 failed, but v 2c gets me this, which looks to be right? (Sorry not sure if this is the response I'm needing or if I should get another.) snmpset -v2c -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"SNMPv2-SMI::enterpri...

dj_oberry · 08-20-2009

I now get this message using that:snmpset -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"snmpset: No securityName specifiedI'm guessing that there is an additional setting in the router I need at this point?

dj_oberry · 08-07-2009

Thanks, that wasn't the issue, but it helped me find the issue while check for that. Apparantly my router wasnt receiving its ntp from the server I requested. It was trying to use itself. I removed all NTP information and redid it, and that fixed the...

dj_oberry · 07-08-2009

Thanks for the help. I was able to find the issue. I need an advanced ip services feature-set image. I will work on getting one.

Member Since	‎11-30-2006 10:10 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	17

User Statistics

User Activity

Multiple PPPoE session issue

Use Cisco SNMP ping mib

Cisco NTP issues

Terminate PPPoE on 2821 Router

OSPF help. Looping log messages?

Re: Use Cisco SNMP ping mib

Re: Use Cisco SNMP ping mib

Re: Use Cisco SNMP ping mib

Re: Cisco NTP issues

Re: Terminate PPPoE on 2821 Router