Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anybody happen to know if you can terminate a double-tagged frame using an SVI, instead of a physical interface using sub-interfaces? Everything I read on double-tag frame termination or q-in-q vlan tag termination has it terminated to some SPA ...
I am interested in using a 7206VXR as a Session Border Controller for some of our SIP clients. It is hard finding any documention on the VXR and CUBE, but I have run across some documention that says it supports it. What I want to know is, what exact...
I have a WS-X6408A-GBIC line-card in my 7609. I am doing QOS on this router, but what is odd to me is that my COS 5 value is not mapped to my Rx strict-priority queue 2? This does not look normal, but maybe it is?? I have seen other examples with the...
Does anybody know of something to test bidirectional TCP flows, that will actually give you your actual CIR that has been provisioned on a particular uplink interface?See the problem is, when you provision a customer with a CIR of say 60Mbps down and...
I have an issue with one of my Gig-E interface's on my 7609. I am running 12.2(18)SXF8. The module is a WS-X6408A-GBIC. Every once in a while my input rate counter will show -93420686.67 and then a few minutes later it jumps to 107875360.83, where th...
Thanks again! By the way, I had already opened a TAC case a couple weeks ago on this issue. They went through all my QOS configurations with a fine tooth comb, across every router and switch hop and they said everything was provisioned correctly, whi...
Edison, I appreciate it, but all of my egress queuing is configured correctly, which why I am interested in the ingress portion. It seems to be a QOS issue and am just double checking everything, ya know?Let me ask you this. Have you ever heard RTP p...
Edison, I have actually tried that, "priority-queue cos-map 1 5" and it does nothing. It says something like propagating to all interfaces, but when I look at the queuing on the interface, nothing changes?Do you happen to know how to manually change ...
Joseph, Thanks for the reply. My problem is not with our Cisco gear. I can use ingress/egress policers and or ingress policers and egress traffic shaping/limiting using SRR queuing, while adjusting for bursting and get my CIR all day long, bidirectio...
Medan,That is correct...I only have one 7609 that will be peering with the 3 providers. I wish I had another one, but another 7609 with redundant 720's is just not in the budget right now.What you said about load-sharing the two providers and path pr...
