Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, We are trying to migrate access-points 2702 from the WLC 5508 (8.0.152.0) to the different controller WLC 5508 (8.5.140.0). Once the AP joins a new controller, it downloads a new softare, reloads and is in the donwloading status again - sh...
Hello all !!! I am trying to do copy startup config to SCP location using a tacacs account set to privilege level 1. So I included this command to the level 1 using:privilege exec level 1 copy startup-configprivilege exec level 1 copy But here is wha...
Hi all,
I have a situation when it would be useful to forward broadcast from one subnet to different destinations based on the packet's source. Let's say we have 2 group of servers on the same subnet and from one group I need to forward broadcasts to...
Hi all,
Hopefully someone can help with the issue I am facing. We have 3850 access switches connected via fiber to Nexus 93180YC-EX at distribution layer. Sometimes we run into issue that Nexus is err disabling its port due to UDLD Empty Echo problem...
Well, they use DHCP option 43 to receive the WLC information and they have set the primary base to the new controller only.. But I will check this to make sure. Thanks.
Hi again! So this was about the double-download issue, but another issue appeared.. We have now two testing APs registered on the WLC and in case of the WLC reset, those APs will join the WLC after a long time, like 20 mins and then they are in downl...
