Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We are facing issue of continous packet discards On nexus4001L link (int po2) to Nexus5020 switch. Nexus4001L is installed in IBM blade center server and we have FCOE enabled in this setup.Output from Nexus4K and Nexus5K switch----------------...
Hi All,I am facing issues with Tacacs authentication on Nexus4001L switch. I have configured AAA and tacacs server details on Nexus4001l switch side but tacacs authentication is not working. AAA server is configured with correct details but due to so...
Hi Wk,Yes the issue was solved.There are some restrictions on usernames for logging in the N4k switch. pasted below the restrcition and it is from Cisco Nexus4001l configuration guide.I hope it helps.ThanksMahi
Hi Borman,You need to increase the number of AS prepending in the BGP AS prepend statement. Let's say you are prepending your own AS 5 times from router B for 1.0.0.0/24 subnet so increase it to 10 times and see the result. if it don't solve the pro...
Hi Mikram,Can you also confirm the code you are running in Nexus4001l switches as well if your tacacs ID starts with a number? It seems there is also a bug if the tacacs ID starts with a number, tacacs authentication ll not work in these switches.Tha...
Hi Mikram,Thansk for the reply. Can you specify in detail which advanced feature need to be enabled in Cisco ACS for 4001l authentication to work?I also want to mention that we also have Nexus5020 tacacs authentication working fine with same ACS serv...
Hi Prkrishnan,Thanks for the reply.I am using the same configuration which you are using but Tacacs authentication is not working for these Nexus4001l switches. I also have other nexus switches Nexus7010, Nexus5020 - all other nexus are working fine ...
