Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am struggling with VPN clients and the NPS. Today I am using the Meraki option selected as direct read to the AD, I think is as a LDAP.I still want to use the NPS, but my default policy do not work, its says in the event view that my policy do not ...
Hello Friends,I am responsable to desing network diagram situation where will be a lot of differente stores with each one with its own internet connection, and I would like to understand this cenario when using splash page + Radius Auth(with a connec...
Having the same problem with the same model !!I think that the problem is the Software version, 6.4.0-102, I can not find other thing to answer why this simple config is not working.
Okey, just a report to keep everybody updated about the change of bit rate...In my case there was not changing..In Wireless Heath, there is no correlation about changing the bit rate and the number of connections problems around association and auth ...
I am experiencing the same issue in a home network with a simple wpa2-psk ssid.The few clients, from time to time, are in the lwireless heath log about auth failling and association fail.I was experiencing at the same time problems relate do the PoE ...
It is workings now! I keep the same configuration but I uncheck all option about NAS Porty Type and did a reboot on the NPS service instead of the server itself. Windows and its need of random reboots rsrrsrsThank you guys !!
Hey Philip, thanks for the clarification, so my Win server is a 2012, in the NPS I tried to make it stop caring about the NAS port type, but I couldn't, I didn't see any option to disable this setting, I tried un-check all option, or checking all the...
