About dapo dimeji

dapo dimeji · 12-01-2015

I am using a Cisco ASA 5510 which has 4 interfaces: Inside, Outside, Failover and the DMZ. The DMZ interface has two subinterfaces.The Inside interface is setup as a Physical trunk with a subinterface having a Vlan (example: Vlan 10)The Outside inter...

dapo dimeji · 11-16-2015

Hello All, I have a change in design with my ASA (Active / standby) connecting two stand alone switches. I previously had the active ASA connected to Switch 1 and the standby connected to switch 2. The two switches were trunked via a physical cable....

dapo dimeji · 10-08-2015

My call manager( Publisher) just failed after a restart and the other secondary call managers (subscriber's) have failed to display global Directories, can any one help with how to resolve this, to get the subscribers to display directories contacts?...

dapo dimeji · 10-08-2015

My call manager( Publisher) just failed after a restart and the other secondary call managers (subscriber's) have failed to display global Directories, can any one help with how to resolve this, to get the subscribers to display directories contacts?...

dapo dimeji · 03-31-2015

Hope to get some help on this: I have a dell poweredge R720 Server with a broadcom NIC, It's a Virtual Host running 3 diff VM's on it. The server has 4 Adapter connections to two diff Cisco 3750 Switches which have flapping ports. The Switchports are...

dapo dimeji · 09-29-2016

I am also experiencing similar issue with my host from the inside interface of the ASA unable to communicate with a host i setup in the DMZ interface. From the Outside interface i am able to reach the host in the DMZ interface however from the inside...

dapo dimeji · 03-08-2016

Hello Guys I have a problem with this same WLC2504. any help? I have a WLC 2504 which has a broken connection to the RADIUS and Certificate Authentication Sever. The server seems to have developed an issue whereby its lost communication with the Glob...

dapo dimeji · 12-03-2015

Hi Akshay, I have got things working to a good level. I applied the same traffic config below: same-security-traffic permit inter-interface same-security-traffic permit intra-interface I mainly had to create an interface for Vlan 50 with in IP Addres...

dapo dimeji · 12-03-2015

Hi Akshay, Thank you for your response. I am trying to get devices on Vlan 20 & 30 (DMZ Interface) to communicate with deviceson Vlan 10 (Inside Interface). I have a trunk port setup on the new DMZ switch to allow vlans 20,30 & 40 from the DMZ interf...

dapo dimeji · 11-19-2015

Thanks Guys your replies have been really helpful, I restarted both ASA's (Active / Standby) and made sure I powered up the Primary ASA first before the secondary. The primary is now running as Active and the secondary as Standby. I guess the seconda...

Member Since	‎03-31-2015 03:48 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	15

User Statistics

User Activity

ASA 5510: dmz Interface segregation from one switch to another

Two ASA 5510 (Active / Standby) connecting to two stack switches

Cisco Call manager Directory service not working on subscriber after publisher fails

Cisco Call manager Directory service not working on subscriber after publisher fails

3750 Switchport flapping

I am also experiencing

Hello Guys I have a problem

Hi Akshay,

Hi Akshay,

Thanks Guys your replies have