Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a server called TEL1 which is running the following:UCS B200 M4E5-2690 v3 CPUUCS Manager on firmware 2.2(3f)Server firmware:-- Adapter 1 = Cisco VIC1240 V4.0(1f)-- BIOS B200M4.2.2.3d.0.111420141438-- Board Controller 5.0-- CIMC Controller 2.2(...
I have a UCS B200 M3 and B200 M4 server which I need to disable 1 of the 2 processors for licensing purposes. From what I can see, this is only achievable by physically removing the 2nd processor and removing the RAM allocated to that processor. Is t...
I have a Windows7 workstation with multiple versions of Dot.Net as shown here:v2.0.50727 V=2.0.50727.5420v3.0 V=3.0.30729.5420Windows Communication Foundation,3.0.4506.5420Windows Presentation Foundation,3.0.6920.5011v3.5 ...
I have 2 MDS 9148 switches which we use as zoning switches. We have the following (simplified) setup:
EMC_VNX5400_SAN_1, zoned to VMware host VMHOST01 & VMHOST02 in vCentreFarm01- in VSAN10EMC_VNX5400_SAN_2, zoned to VMware host VMHOST03 & VMHOST04 ...
I have two MDS9148 switches for redundancy and have a number of CISCO UCS Blade servers zoned to various EMC VNX SANs and it has all been working OK and still is.
We recently installed 3x Dell730 servers and a NetApp NAS and created the zoning on bo...
Thanks Wes, the part I don't get is how you found this: @Wes Austin wrote:... then you are using the 2.2.8g release bundle based on this document: Release Bundle Contents for Cisco UCS Manager, Release 2.2ucs-b200-m3-k9-cimc.3.1.21e.binIs there a loo...
I checked the document and I'm unable to decipher if my B200 M3 server running 3.1(21e) (CICM controller) is compatible with my UCS Manager running 2.2(3f)? I would guess that the architecture version has to be at or above the firmware version of ANY...
Thanks Wes, I thought as much. I have reduced cores for SQL licensing and for Oracle licensing we need to remove a processor but as you said, it looks like the only way is to remove the 2nd CPU and remove the allocated RAM to that CPU and try to relo...
I assume IVR relates to trunking of switches but in this case both switches are separate fabric domains, but redundant to each other so that if one goes down the other will continue to provide fabric connectivity to all devices. We don't have IVR any...
I don't know what just happened, but the WWNs are appearing now on the NetApp now!!
The only thing I can think of is that Walters commands have triggered something, I don't know what!
Thank you all so much for your help. If you can help me to find ...
