About DominikKristof

DominikKristof · 04-02-2015

Hello all,We had problems with voice quality recently. The issue was with local calls between analog and IP phone or between analog phones (each connected to different voice GW) while crackling was heard only on IP phone. It all pointed to QoS since ...

DominikKristof · 06-06-2024

I am afraid this feature is unfortunately gone. I had same trail of thoughts and was wondering if we can use mgmt/con port as aux with certain setup but never found anything. Router replacements were sooo much easier with reverse telnet.

DominikKristof · 04-19-2022

I have same problem with C9500. Have you managed to resolve it?

DominikKristof · 10-06-2021

Hi,I don't find it completely true. When I ping IP of L2 managed switch lets say, I check arp entry on core switch and timeout value for L2 switch management IP is not changed to 0 and keeps incrementing. Even tried snmpwalk from SNMP server and did ...

DominikKristof · 08-24-2020

Register 0x2302 disables rommon since that is how password recovery disable works on this box. So if your bootstatement points to file which does not exist, you have to either replace bootflash memory for the one which contains file to which boot sta...

DominikKristof · 01-24-2020

I've had same problem as you (no MAC, no CDP, port showing not connected, PoE providing power, log from console telling waiting for IP). In my case it was 2802I AP and what fixed the problem was hardcode speed/duplex to 100M (before it was on auto). ...

Member Since	‎04-01-2015 11:35 PM
Date Last Visited	‎06-11-2024 01:03 AM
Posts	9

User Statistics

User Activity

WS-C6509-E, SUP2T, Microflow Policing drops not visible

Re: Reverse Telnet on Catalyst 8500 (no Aux port)

Re: Smart license command with the IOS 17.03.xx

Re: ARP Aging Time

Re: Catalyst 4506E with Sup8E

Re: 2820i AP, 5508 WLCs, DHCP Relay - DHCP NOT working