Hello All,
hope someone can help me with this.
For an 3rd Party Application I need to send back an Access_Challenge as Access Type in Cisco ISE.
We're using Cisco ISE to verify source IP as one Factor, if the IP is not in our list, the result shoul...
Hello,i have a question about the Timezone settings in the WLCs.We have serveral systems: 2100, 2500, 4400, 5500 series.Problem occurs at firmware 7.0.98.0, 7.0.220.0, 7.0.240.0, 7.4.100.0So i think this issue is not firmware or modelbased.I have con...
Hello,we have two WCS systems in our environment. One for US, one for EU. Now we try to consolidate them.I have already transfered some Controllers and APs to from the US WCS to the EU WCS.When i try to export and import a map i always get errors lik...
Hello Richard,
thanks for your reply.
This solution is for a product called Bomgar.
By default we have 2-factor authentication activated
- Username / Password
- Token
But for some companys we'vr intruduced using the source IP as one factor to get r...
Sadly Windows isn't the source of the issue.I tried two unix timeservers as well and same result.All other systems, Junipers, Cisco Switches, Checkpoint Firewalls, OpNet Appliances are working correctly with this servers.
Hello Scott,well, this would be the workaround if there is no 'real' solution for this, but some configuration for 32 controllers (even with prime i can't do this with templates).I can't belive that the controllers for some reason don't know how to h...
Hi,i have a similar problem, i want to locate the rogue APs but we have a slightly big environment (600APs)We have a own subnet for every floor and building routed with layer 3 switches. When i use this technologie i would need a "Rogue Detection AP...
