Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Environment - Cisco ASAv30 9.10(1) - Cisco AnyConnect VPN client 4.7 We have a requirement for our VPN users to access certain external resources (e.g. salesforce.com) but to appear to be coming from the ASA's external IP address. This is bec...
Hello all, Wondering if someone can help me with the following. We are moving datacenter and as a result our users will be required to connect to a new FQDN within their AnyConnect Secure Mobility VPN Client. The new FQDN points at a new Cisco ASA. ...
Hello all,
Hoping to get some assistance with configuring TACACS+ on an ASA 5525 with ISE for aaa
Environment:
ASA5525 - 9.8(2)20 active/standby clusterISE - 2.1.0.474
We currently use RADIUS for aaa and are looking to switch over to TACACS+
Followin...
Hi,
Hoping to pick your brains about configuring TACACS+ on an ASA 5525 with ISE for aaa
Environment:
ASA5525 - 9.8(2)20 active/standby clusterISE - 2.1.0.474
We currently use RADIUS for aaa and are looking to switch over to TACACS+
Following the...
Hello,
There is a website users connect to that only allows whitelisted IP addresses. The issue we have is that when accessing the site they will be going via CWS and using a public IP address we have no control over. Please can someone advise how ...
I was reading your post here : https://community.cisco.com/t5/security-documents/dynamic-split-tunneling-in-anyconnect-vpn/ta-p/3773878 "The dynamic split tunneling exclusions address scenarios when traffic pertaining to a certain service needs to be...
