Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks
I have a 9200CX with a corrupt IOS, I need to boot from either a USB or a SD card to fix this, problem is the ROMMON commands do not include anything useful
boot Load and boot an executable imagecat Display text content from a filecopy Copy ...
Hi guysI recently replaced an 877M-K9 VO1 router with an 877VA-K9 router in order to take advantage of a faster VDSL connection.I massaged the working configuration of the 877M and applied it without the ACLs to the 877VA running IOS 15.7(3) and imme...
HiI've just installed FindIT on a laptop running WinDoze 8.1, FindIT wants OS Credentials in order to run nut it won't accept my local login and password, how do I get around this? Does FindIT expect the computer to be a member of a domain?
Thanks, that did not work. The image was read but then the switch froze, tried this numerous times (as per the description in my post)Found the solution though - used the "set" command to change the boot source location to my USB drive, image loaded ...
Hi Xividar
I have an 887VA connected to Telstra FTTN which uses VDSL2, this may be of use to you:
hostname 887VA
!
clock timezone AWST 8
!
no ip source-route
ip cef
!
multilink bundle-name authenticated
!
username admin privilege 15 secret SECRET
!...
Thanks PaulGeorg Pauwen steered me in the right direction and I removed the ACLs on the DMZ interface as well as ACL 122 - I was mislead by the fact that the configuration worked on an older router with a much older IOS
Thanks GeorgI removed the access-lists as suggested and I am able to connect to up-stream hosts now but my access-list 121 does not seem to be working properly, as I said, this configuration was working on an older ADSL router so there must be someth...
Hi Georg Thanks for the quick response.Question; are you saying that with the ACLs 101,102 and 122 removed there will be a free flow of data from DMZ to WAN?
