Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
While developing workflows in UCSD, one item that I am having issues finding is how to set the priority of a Vlan. Deploying a new Vlan, and allowing it on a trunk are easy enough. However, I need to be able to set the priority to ensure the proper L...
All,
Been doing some research on boot options for Cisco UCS. One item in the list is "Remote Virtual Drive." I can't find too much in the documentation, or via searching online about it. There is a brief mention of it in the UCSM Server guide. In a...
All,While researching UCSM server pool policies it was noted that to build one you usually construct them via:1. Define a Pool2. Define a Server Pool Policy Qualification3. Tie the two above together with a Server Pool PolicyThe documentation states ...
All, I have any old version of Call Manger, v4.1. Anyways, I need to upgrade an MGCP gateway that is used by this CCM cluster. I have three general questions in relation to this gateway. Question #1: Is there an interopability matrix for CM v...
All, I have been playing with IOS IPS. I set up an event action override to block when a certain risk rating was triggered. It worked correctly as expected. Then when I changed the risk rating, in the event action override, where it shouldn't hav...
Solved my own problem. To set the bridge priority for a Vlan use the task "ExecuteNetworkDeviceCLI_1484." When you get to the CLI commands use the following:
conf tspanning-tree vlan ${Vlan Number} priority 4096end
The key is using the variable f...
Kenny,The post was to confirm whether I had Server Pool Policy, and Blade Server Discovery understood correctly.Thanks in advance. Good day.-Kryptkeeper
uscitizen, My company's business continuity plan dictates that if our CMs environment goes down there has to be a backup. While reading up on SRST, I came across CME as SRST. I haven't heard anything good about SRST so I thought that CME as SRST ...
Kevin, I answered a similar question from another user a minute ago. Please read the link below. It should clear up most of your confusion. (Once you have read the link then keep reading below.) Also, if your router is capable of using the 5...
Kevin, Signature Files with "IOS-SXXX-CLI.pkg" are the most up to date signature files for download from cisco. The files that come with SDM that end in ".sdf" are v4.x signature format. So, depending on the code you have you have a router with su...
