Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,I'm having difficulties getting the following setup to work. I could do with a second opinion, I'd really appreciate if someone could review my setup and let me know if I'm missing something obvious?High level overview (corresponds to uploa...
Hi Folks,I want to set up a small proof of concept IP-PBX system for R&D purposes. Specifically, I'm aiming to setup a mini Cisco PBX, and configure one of the extensions to be an IVR, calling onto our own custom dynamically-JSP-generated VXML applic...
Hi Folks,I have been asked to deploy a small-scale remote access solution to one of our existing network perimeters. I have been carrying out some online research and think I have identified a low-cost solution, but I'd appreciate it if my thinking ...
Hi Folks,I have been asked to deploy a small-scale remote access solution to one of our existing network perimeters. I have been carrying out some online research and think I have identified a low-cost solution, but I'd appreciate it if my thinking ...
Hi Folks,I'll try to make this brief!I have a pair of stacked 2960S (LAN Base WS-C2960S-48TS-L to be exact) switches running 12.2(58)SE2 configured with multiple VLANs. None of the VLANs have any L3 interfaces enabled and the switch can therefore on...
Solved.Turned out to be a problem with those pesky vpn-filters, as explained here:http://www.routerdiscussions.com/viewtopic.php?f=17&t=13894and here:http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_groups.html#wp1093578Just...
Hi Andrew,Many thanks for your reply.I agree that 5520's would be overkill for this minor VPN deployment if that was their only intended function, however the pair are responsibly for a much larger role in the perimeter design; the choice for the 552...
Hi,Thank you both for your responses - I did just revert to removing the fa0 configuration and configured a managment VLAN instead.The behaviour I was seeing would be acceptable in situations whereby the lack of fa0 connectivity to downstream clients...
Raga,Thanks very much for your response - I haven't come across this configuration before and it seems that it should satisfy our requirements so I'll give it a go.Good to have confirmation on the Cisco VPN Client too, I hadn't considered it in terms...
