I just got an ASA 5510. It has ethernet ports 1-3...but 3 never shows up in ASDM nor when I do a sho int....any reason why?Thanks

I'm not good at ISO or routing so forgive me...I have a 2811 with dual T1's and two available ethernet ports. I want to assign one to our LAN (the port the firewall plugs into) and one for a computer that sits out by itself for a customer. I have a r...

I have five offices all running 2811 routers and ASA 5510 firewalls. Each office is connected by bonded T1's using MPLS. The ASA is configured with a WAN, DMZ, and LAN ports. I want the users on each LAN to be able to connect to other offices DMZ's. ...

I'm a noob so keep it simple for me. I'm not good at the commands.I want to lock down my PIX 501 (v.6.2) by doing the following:Disable all incoming traffic except if initiated by someone on the inside and https access to one web serverBlock all outg...

I have two PIX 501's that are connected via VPN. I want to create one client connection so that as the admin I can get into the network if needed. What do I need to do on the PIX's to set up the client connection. I'm noob so you'll have to dumb it ...