I recently upgraded to version 8.2(1). I then installed an M3 card after the upgrade for an M3 and F3 mixture in the chassis.
I know F3 supports layer 3 functionality, however M3 is more of a layer 3 card. If the M3 card fails or i remove it, wha...
Just as an update,
QL45212 and Nexus 9508
In order to get the link to fire, i needed to turn fec off on the Nexus side. Any other fec or auto negotiation failed to link.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20160323-smiThe no vstack global configuration command to disable the Smart Install client feature was introduced with the fix for Cisco bug CSCtj75729<> (Ability to shut ...
OK, good so you have the right hardware.In the past, I needed to add the license I got when I bought the layer 3 card to get anything layer 3 working on the 5k.
If your FPGA supports sfp+ you would need to make sure you are using a supported sfp+ model/manufacturer for your hardware.
Your network device needs to support 10Gbase-T as well.
What model switch are you connecting to?