Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How do I know if I have one 128 MB memory card or two 64 MB memory cards in a 3745 router without physically opening it up? Is there an IOS command that will tell me? Any tricks to finding this out from other commands?
I seem to remember that there is an undocumented ios command that will allow you to send digits to the router via ios commands. I need to troubleshoot dial peers via telnet without having someone at the site dial from their phone. Anyone know the c...
CCM 3.1, IP Phone 7940, H323 with 3660 routers. Planning to upgrade to CCM 3.3 soon.I have a user who is getting calls that should go to the attendant. He would like a way to automatically send callers from the outside to the attendant and allow ca...
I have a 3661 with a PRI port that connects to the LEC to provide voice in and out for my Call Manager. I also have another 3661 with an NM-8BU and 6 mica modems. Is it possible to allow analog modems to dialup through the PRI to the mica modems wi...
I would be interested in finding out how people are implementing TDD (Telecommunications Device for the Deaf) with Call Manager. I am required to supply TDD connections, but Call Manager does not support TDD from what I have been able to find.
My co-worker next to me found the answer. It is 'show platform'. Gives you data on the Dimms in each slot, and if one is empty, it tells you so. Pretty handy for planning memory upgrades!
I upgraded to 12.04. Now, the Association Table shows a question mark to the left of the far end of the link's IP Address. The link seems to be working otherwise. What does that mean?
