Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I will have my internal LAN with Cisco Catalyst (3750e's) and WAN with some 2801(s) to a MPLS network for my private WAN. I will also have a cable connection as a failover should the MPLS network fail. The connectivity to the cable connection will be...
I have a scenario of having an infrastructure of HP Procurve switches. I have 802.3af PoE to the access layer. The switches support QoS, VLAN, LLDP (not CDP), etc... I am interested in Cisco Call Manager to replace current Avaya based PBX's. Can this...
OK, I thought I had everything figured out with object tracking on a dhcp interface... Well I still have issues. I have cable modem on port Fa4 of the 871 and dsl on a Westell router connected to a switchport off of the 871. Tracking and routing look...
I have a 871W connecting to a cable modem getting public address information via DHCP, I have added a DSL connection using a Westell router/modem connecting to one of the switchports on the 871W. What is the best way to configure automatic failover f...
I don't think I'll have any other choice but to use BGP at the router level. This is something I think is in stone with AT&T. My follow up question is if I'm understanding this correctly, I will have my switch ports that are "off-net" going to my AT&...
I think I have it riddled out... I don't have a diagram to show but I think I can explain my solution which will offer insight. I will have a switch that will have two OSPF areas defined: Area 16 (some arbitrary number) for my internal lan to know be...
Thanks for your reply. I am running c870-advipservicesk9-mz.124-11.T.bin already. I tinkered a little while longer after I posted my request and I might have it resolved. It seems to have worked the couple of times I tested it tonight. What I did was...
Never mind, found that you could do tracking on a DHCP learned route.http://www.cisco.com/en/US/partner/products/ps6350/products_configuration_guide_chapter09186a00804457cd.html#wp1077751
I can do that and I know this will force a login from the users when initiating a match against a ACL for port 80, but will it add or give me better tracking capability to log an IP address to see how much time they are spending on the Internet?
