Hi,Anybody knows how to configure mpls netflow egress for a cisco router running 12.2(25)S service provider image ?The following link says there is a restriction for it:http://www.cisco.com/en/US/partner/products/ps6350/products_configuration_guide_c...
Anybody has done FRF.12 (Frame-relay fragment) on a map class on a 7200VXR with 12.0(30)S IOS ? I see that is not supported, and I do not know how to do it in any other way! Help is appreciated.Regards,Luis
While applying qos to NPE-G1 GigaEthernet intefaces I noticed that everytime I apply CBWFQ or LLQ to an output QoS technique on the subinterfaces of the gigaethernet link of the 7200VXR-NPE-G1, the interface resets!! Is this the regular behaviour ? I...
Anybody knows if the MTU for the FastEthernet interface on the C7200-I/O-2FE/E can be changed ?I'm planning on implementing MPLS/VPNs using the FA Port as a MPLS Trunk and I need to change de MTU.
Anybody has any idea of how to deal with the following issue.I have VoIP running over a VPN if I do RTP Header compression, the RTP headers will never be compressed because the interface that has the command only sees VPN traffic. Can I compress the ...
On another conversation on netpro I saw that someone referenced to RIPE-229 they say that in there they show you how to "do the maths" but i saw the document and couldn't figure it out.... the most I did where some calculations in Excel, and what I s...
Martin,Thanks for your tip, I'll keep it in mind, finally a case was opened for this issue, and TAC pointed out to me the following bug CSCed28579 which by the way is as cisco says "the expected behaviour", I do not really agree with this because if ...
Hi there,Tried the no keepalive thing, and even though the interface won't go down and the Up, the ospf adjacencies do. regarding the Bandwidth, that is correct, actually this is a Link from one 7200 to another 7200 through a LAN radio Link that can ...
Hello,Actually I have a couple of 7200VXR-NPE-G1 which I haven't installed, but certainly if I apply the same QoS Technique to a FastEthernet interface on the same router, the interface won't reset. But still, I tried reserving less than 75% but the ...
