Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 static IP's issued by my ISP.65.40.161.96-254The 827 is configured for BVI. My goal is to conigure .96 for network traffic and .97 to an FTP server behind the cpe. Is this possible and how?
I configured the C827 to route. I can ping the router from the pc, ping my ISP's DNS server from the router. but cannot ping the DNS server from the pc.Can you someone take look at the config to see what I missed?
I Literally recieve this display during post:H??pM???X? ???V ?(?????P?C???X? ??ET c?(?? ??????????????P?C??<pause-break> will not get me to rommon>, does anyone know of a work around or a way to laod a new IOS to the router?
I created (4) DHCP pools in a 1751-v router. All connections are defaulting to pull an IP from the first pool only. When I statically assign each connection to it's specified pool. I am unable to ping any outside address or the default gateway of eac...
Cisco IOS Software, C1700 Software (C1700-K9O3SV8Y7-M), Version 12.4(7), RELEASE SOFTWARE (fc6)(2) Cisco Catalyst 1900/2820 Enterprise Edition Software Version V9.00.07 I cannot get any port on switch #2 to pull an IP address from the routers SHCP V...
I was searching for my own answer and read your post.interface ATM0/0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 I see the Point to Point Protocol configured but wanted t...
Thanks for providing the link to read.I rebuilt the router config as follows:no ip dhcp use vrf connectedip dhcp excluded-address 192.168.3.1ip dhcp excluded-address 192.168.4.1ip dhcp excluded-address 192.168.5.1!ip dhcp pool Network network 192.1...
Thanks for replying,The server is not a DHCP server, only web/FTP server.The first switch (Linksys) is just a plain switch. All hardware is connecting to that switch. The idea is to have a different private IP on each each hardware connected to the s...
