Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Guys and Gals,I need to allow a level 9 user in my switches the ability to manage interfaces f0/1 to f0/44 but NOT interfaces f0/45 thru interface f0/48 (these are trunks). Any Idea why this does not work...privilege interface level 8 switchport port...
when you configure a bridge-group (to make a2948-L3 more like a switch)and try to allow only 1 mac address per port, usingthe interface command,2948-L3(Config-if)#bridge-group 10 input-address-list 701 (where 701 is a mac address access list), it doe...
I acquired 2 2948G_L3s, for which we had no use for other than as access switches in our lan. They were configured with all ports in bridge group 1, with spanning-tree disabled, except for 2 ports which form a port-channel uplink to a 6509.I have had...
the VPN 3000 series login to active directory (kerberos) really doesn't work. It has never worked on my production ad domains, just my test domain. its not very easy to figure out what is going on.I think Cisco dropped the ball on this, why isn't the...
Just so you don't go crazy; I tried here with "kerberos" and for 3 months could not get it working... I think the reason was that if the AD domain controller is no a forrest root domain controller it somehow messes up the REALM for the ad forrest and...
Several things come to mind...Set your mtu on the vpn client box to 1300 (its one of the defaults) on all "LAN" adapters...Also turn on Nat Traversal"isakmp nat-traversal"
No.The mrtg per ip monitors (in the contrib directory) use a combination of ip accounting, and snmp write strings to do periodic resets of the data. So obviously this was designed to work on IOS only.To monitor whats coming off the inside pix interfa...
