Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I am trying to get my 2xASR9010 to be as one virtual node. when i Try to do that according to the cisco website.http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-3/interfaces/configuration/guide/hc43xasr9kbook/hc43clst.html#wp...
HiWhen i was working in the asa5505 sudenly i lost the console connection and i notice all the led (front and back ethernet ports) flashing rapidly.any idea whythanks for your help
is there a command to over write or force the IP address that is being negotiated during IPCP. The problem is we have 3 lns which allocate the dynamic address but when the user has statically configured or cached previously assigned IP, it uses that ...
Thanks ShivluWhat about the tunnel from R2 to R1. My understanding is that TE tunnels are unidirectional. for the return traffic you need a tunnel from R2 to R1.
Hi Do you have sommple configuration to intigrate with 7600. We have tried to connect 9010 to 7600 in MPLS enevironment,, MP-BGP (vpnv4) didnt comeup so had to back out. any additional setting needs to be don on IOS or XR configs.
yes,,, these commands are absolute must to get the nV edge,, I have to put these in order to get my 2xASR9010 node in to nV system unset CLUSTER_RACK_IDunset CLUSTER_NO_BOOTunset BOOTsync
Hi the answer is in here to make a nV edge system out of 2 ASR 9010 routers https://supportforums.cisco.com/document/145436/asr9k-nv-edge-deployment-guide
