Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 2800 SRST gateway on a tug, yes a tug. When at the jetty the 2800 router connects to my network over a wireless bridge and phones register with the callmanager on the "land" network.When the wireless bridge is un-plugged from the router or p...
I have three switches in a single VTP domain (I actually have lots but 3 will be for this example) A and B are vtp servers C is a client.I creat a VLAN100 on one switch A, this is propagated to the other switches. I set a port on C to be in VLAN100. ...
I set up a VPN LAN to LAN between a cisco 877 and a cisco 3000 concentrator. Internal IP calls between phones work ok . When i tried to call a mobile phone ,that usualy works ok, from the router side, the mobile rings but no conversation is establish...
Hi . I've configured a simple ppp chap dsl o POTS with cisco 877 router. I can't figure out why is the ATM0 and ATM0.2 down and the dialer 0 down when i have a similar config on a cisco 837 that is working . PLease help
Not a solution I'm afraid... I have several 44xx controllers all with high speed connections to my WCS server and these added with no problem. I have a couple of WLC Modules in 28xx routers over slow links (ADSL) and none of these will add to the WCS...
the last post was right in that you press ctrl x to return to the ios CLI.You then enter disconect to stop your session returning to the WLCM when you press return on an empty command line.
We had a similar problem (in schools where any number of users might use a laptop so the user credentials were never cached).We got round the problem by making sure that the EAP-TLS machine authentication box was ticked in the ACS External Database (...
Thanks for the post, I have looked at this and a number of other cases where people are trying to bring two VTP domains together. In these cases the VTP sync works. What I am trying to do is break a single vtp domain into several smaller ones with la...
Hi GP THanks for your sugestions. That Command doesn't exist in the 977 cisco router . I'm still reading the docs you mentioned. Also created a static route on the concentrator to route 192.168.255.1 the loopback address in and add permit out on th...
