Hi AllI am not sure if this is the right forum to post this discussion, But appreciate if anyone could input some idea for meI have a SSM-10 card configured in my ASA 5560. I am able to access the interface and configure the trendmicro setting. The o...

Hi AllI am having some difficult time trying to setup my ISDN line for internet access. I have two ISDN line going to a single router, my configuration is as of below, what am i missing?I am understood from the ISP that SPID configuration is not requ...

Hi AllMy customer has subscribe to two ISDN line on a single router for backup in the event the main lease line is down, he is asking if internal traffic can be load balance on the two line? for Example http traffic to route through ISDN 1 and smtp t...

Hi AllNeed some guide or explaination on the different between these two.We are configuring a site to site VPN Between a cisco ASA and a watchguard firewall. The issue is the Watchguard firewall using only 3DES-CBC or DES-CBC, Does the cisco ASA or p...

Hi allI am configuring a site to site vpn and cisco client vpn for my ASAcan i check do i need to created two transform set name, one for site to site and one for client vpn? or i should just created one transform set name?i went through certain samp...