Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Evening all, I'm trying to set up the above router with three seperate SSIDs, three different VLANs and three different rulebases. Can someone point me toward a template I can use or offer some advice?
We are installing a new E3 unframed circuit 34Mb, and trying to use existing PA-A3-E3 ATM cards.Since there is no longer an ATM switch, is there anything we need to do to account for this?Below is the configuration, which has been used but is unsuces...
Hi,I'm considering dual homing with two different ISPs, considering using PI address pace.To have global routing whats the minimumprefix I will need /21? or will /24work?I believe in the past ISPs filtered on /19, but obvisiously times have moved on....
Hi Anyway to disable vlan tagging on a 7940, I'm testing VoIP from home and all I have is an 831 router and and hub.As expected if I plug the 7940 into a borrowed 3524with trunking enabled, it all works fine.But plugging into the router or the hub br...
Is it true that EIGRP will not form neighbours with ip's that are on secondary interfaces?I have a need to add a /29 to an exisiting /30 network, and I'd rather it not take part in the EIGRP relationship.Thanks
ATM 1/0 is down no traffic at all, both sides.There is a fault light indicator light on both sides.on the respective ATM cards. CD is light green.from show controllers: Facility ALarm: AIS.The circuit has been checked by Telco and its apparently fine...
Thanks Aaron, an erase worked.The phone was used in the office, and had a vlan setting, once I performed the erase and static ip assignment again, it came right up.CheersJason
I'm installing WAN optimization hardware, I don't want EIGRP to form any neighbour relationships over the secondary network.And I don't want the network to be advertised in the routing tables.So I believe I can achieve this by the use of a secondary ...
