Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have Cisco 7204VXR router with IOS version ?IOS (tm) 7200 Software (C7200-IK9SU2-M), Version 12.3(10a), RELEASE SOFTWARE (fc2)?. We just inserted PA-MC-8E1/120 module. The router show the new interfaces in show version command but the enable light...
We are running OSPF; we have PIX 525 protecting our server farm. OSPF process is running fine on PIX. PIX have established adjacencies with switches and routers on the same segment and show full neighbor relationships with all devices. All Interfaces...
We are running OSPF; we have PIX 525 protecting our server farm. OSPF process is running fine on PIX. PIX have established adjacencies with switches and routers on the same segment and show full neighbor relationships with all devices.The problem is ...
We have one site configured for services. All the servers are using SAN for storage. We need create a backup site with same hardware 30kms far. The SAN hardware at both locations needs to communicate. We are using Cisco SAN switches. Both locations ...
I have two links with ISP-A and one link with ISP-B. Can I use maximum-path in this scenario. Requirement is to loadshare traffic on two links from ISP-A.
Other devices configs are standard, I am pasting one of my core switches ospf config and output of show nei. The PIX is connected with two of these switches.OSPF config:router ospf 1 log-adjacency-changes network 172.16.8.0 0.0.0.255 area 101 network...
The server farm IP class is 172.16.1 and 172.16.3.172.16.103 is used to link the firewall with switches and 104 is for state full failover.Output of show ospf nei command.Neighbor ID Pri State Dead Time Address Interface 192.168.255.83 1 FULL/BDR 0:0...
no Mahmood, because PIX is getting all the external routes and the neighbors are established, it is not sending internal network out to other OSPF devices. All other traffic is fine.See the show ospf nei output.Neighbor ID Pri State D...
Please also note that other devices in the same area are showing PIX in there neighbor list and PIX is also showing them in its neighbor list.Output of show run | inc adderip address ccsrv 172.16.1.252 255.255.255.0ip address intf2 172.16.104.252 255...
